|
Re: Reviving our 2011 Robot
I don't think the image is the problem. I upgraded the image on our 2011 a few weeks ago to take off the camera since we're using it on the 2012 robot.
One of the problems we did have was that the 2012 image has set the what modules should be plugged in to what. It's either the analog is plugged in to 1 and the digital is plugged in to 2, or the other away around. It will say so on the imaging tool. I think this may be your problem since you're not getting a voltage and your relays aren't showing any values.
Hope this helps.
|