[JamesCH95]

Originally Posted by AlexH

what i meant was something that works in the same manner as how the pin that holds the receiver and insert ends of a trailer hitch together except used to lock something in place and keep it from rotating.

another idea is you could put a piece of "c" channel that is smaller than the clevis over the ram's rod to physically jam it and keep it from retracting.

The issue with this is that it relies on a human-in-the-loop to function. My opinion is that safety equipment on a robot cart and similar devices should not rely on human involvement. If someone forgets to install the pin, or student A thinks "student B did it" and student B thinks "student A did it" then you have a situation that is exceedingly dangerous as those around it are assuming the piston is locked out when in fact it is not.