Quote:
Originally Posted by Mk.32
If a CIM is pulling 132amps wouldn't PD 40amp breakers throw? And there is a 120amp breaker, so the robot should never pull more then 120 amps, and if it tires to wouldn't the breaker just kill power?
Those power supplies look like the deal of the decade for high power applications, I might get one to run my battery charging array...
|
The 40 amp snap action breakers are a thermal device. When the current is high the device heats up, when it gets to s specific temperature it breaks contact. Since it's an automatic resetting breaker, when the temperature cools down it will reengage the contact. The 40 Amp specification is a requirement that it will
NOT break contact below that current. Above 40 Amps it
WILL break contact, but only after a specified time (at 132 Amps it's just under 1 second).
Do not use the above power supplies to charge batteries. They do not have a current control and do not have an automatic shutoff.