|
Re: Sheet Metal and Autodesk
We've done Cardboard Aided Design in the past, although most notably for large plastic parts. The best example is our 2010 control board which we made for 1/8" ABS. We modeled what we wanted in Inventor and then mocked it up in cardboard to sense check ourselves and make sure that everyone understood what the end product would be like. The cardboard is a huge help.
Cardboard Mockup
https://picasaweb.google.com/finneyr...06561378797554
Sense Check
https://picasaweb.google.com/finneyr...06583701230130
Final Product
https://picasaweb.google.com/finneyr...13921786997378
https://picasaweb.google.com/finneyr...97045504596098
__________________
Mark
Brick walls are for other people. - Randy Pausch
Last edited by kramarczyk : 18-11-2012 at 12:33.
Reason: removed in-line pics
|