View Single Post
  #19   Spotlight this post!  
Unread 17-12-2012, 23:22
Spirator Spirator is offline
Registered User
AKA: Munaum Muhammad
FRC #3132 (The Thunder Down Under)
Team Role: Mentor
 
Join Date: Jan 2010
Rookie Year: 2010
Location: Sydney, Australia
Posts: 109
Spirator is a jewel in the roughSpirator is a jewel in the roughSpirator is a jewel in the rough
Re: Step by Step Hole Reaming Instructions

We've been doing exactly this. We use a 20mm chassis punch and then ream the hole to 22mm and deburr until we get to the proper press fit tolerance. It works very well and the bearings haven't come out yet. It takes around 10-15 mins per press fit.

No machinery required.
__________________