[midway78224]

Originally Posted by ttldomination

To you folks, since the connection isn't necessarily rigid/bolted, what's preventing "play" in the bumpers? I'd image that if you have have a 1/4" pin into a 1/4" + some set of holes, you're going to get some play?

- Sunny G.

Sorry for not explaining well enough. Yes we did drill a 1/4 hole for a secure connection. We did a quick release pin every eight inches for all sides. It was also tested against other robots at a off-season event as well as at home against other robots. It held up with the problems and had no play what so ever. It went though a 1x1" square tubing and c-base channel on the chassis.