Quote:
Originally Posted by Orion.DeYoe
Based on the rules and some common sense (the GDC didn't seem to have any at the time they wrote the rules) I have to conclude that the bar (being in contact with the bar) at 30 in. is part of zone 1, the bar at 60 in. is part of zone 2, and the bar at 90 in. is part of zone 3.
The rules weren't very clear on the exact location of the three zones in relation to the three crossbars.
|
It seems from my understanding that the hanging points are given based on where the bottom of your robot is. so: if you hang from the 30" bar and your robot is .5" above the floor (level 0), then you get 10 points. so, if you hang from the second bar, as long as your robot is over the first bar, you are counted in the 20 point zone. basically I think it goes like this: 1st bar to above the floor: 1st zone or 10 points. 2nd bar to above the 1st bar is the 20 point zone. and 3rd bar to above the second bar is the 30 point zone. hope that made sense