|
Re: Robot frame/bumper question
One other thing: R04: In the STARTING CONFIGURATION, no part of the ROBOT may extend outside the vertical projection of the FRAME
PERIMETER, with the exception of minor protrusions such as bolt heads, fastener ends, rivets, etc.
If a ROBOT is designed as intended and pushed up against a vertical wall (in STARTING
CONFIGURATION and with BUMPERS removed), only the FRAME PERIMETER (or
minor protrusions) will be in contact with the wall.
__________________
Nathan Hui
B.S. Electrical Engineering, UCSD '16
FRC 2473 (CHS Robotics), Team Captain '12
FTC 4950, 6038
|