I installed the FRC Bridge Configuration Utility program, but whenever I try and configure it, I'm told to reset. I reset it multiple times but get the same error every time
Set the team number and a custom WPA Key, Radio: "DAP1522 RevB" and Mode: "2.4GHz Access Point". The mode on the D-Link itself (by the power plug and reset button) is also set to AP 2.5 GHz, the power is plugged in all the way, and the ethernet cable is attached between my laptop and the D-Link router.
The error says:
Quote:
Bridge configuration failed: Illegal firmware version found (2.02)
Please reset the bridge and try again
|