Quote:
Originally Posted by ticoloco12
but could you say perhaps have a robot, on the floor, touch the first rung (level 1) then reach to level level 2 (second rung) and pull itself up?
That is, go from 0, to 1, to 2, but, let go of 1 before letting go of 0, as to only be in contact with 2 zones at a time?
it seems to me this satisfies, sequential order, and only touching two at a time
the rules do not demand using zone 1 to propel youreself to zone 2. you could do it from 0, as long as you contact zone 1, and let go of it before contacting zone 2.
|
I don't think that this interpretation would be true. If you contact level 0 and 1, then let go of level 1, your climb has been reset. You are now starting your sequence over, and lifting by contacting zone 2 from the floor is, obviously, out of sequence and not a valid climb. . To support this statement I leave you an excerpt form section 3.1.5.2 of the game manual.
Quote:
|
If a CLIMB is considered unacceptable (e.g. a ROBOT has touched non-adjacent Levels or more than two (2) Levels at a time
|
emphasis mine.