Thread: Windriver won't connect to cRIO target
View Single Post
  #3   Spotlight this post!  
Unread 11-01-2013, 10:28
dowster dowster is offline
Breathes Code
AKA: Brady
FRC #1091 (Oriole Assault)
Team Role: Programmer
  
Join Date: Sep 2011
Rookie Year: 2011
Location: Hartford
Posts: 11
dowster is an unknown quantity at this point
Re: Windriver won't connect to cRIO target
Quote:
Originally Posted by RufflesRidge View Post
1) Make sure you've imaged the cRIO for C++
2) Make sure your IP is set to 10.XX.YY.ZZ where XXYY is your four digit team number and ZZ is anything not in use on the network (the cRIO is .2 and the D-Link if in use is .1, the camera is .11, a computer configured by the DS software is .5 wired and .9 wireless).
3) Try turning off any firewall on the PC
Thank you, I had forgotten that I had to re-image the cRIO for C++ (we had it on LabView.....). Also had to disable the firewall.

Thanks to everyone for the quick responses.
Reply With Quote