|
Re: vex pro shifting transmission
We assembled the transmissions tonight.
There really is nothing difficult about the process, if you follow the guide.
Here is a partially assembled transmission with a touch of white lithium grease.
There is one step that can be a bit tricky.
When installing the pneumatic coupler, the nut needs to be near the very end of the shaft.
Careful inspection of this image will reveal the nut is slightly out of proper rotation.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|