Thread: cRIO imaging tool hangs on "Rebooting cRIO"
View Single Post
  #1   Spotlight this post!  
Unread 12-01-2013, 14:06
ILikePizza555's Avatar
ILikePizza555 ILikePizza555 is offline
Registered User
AKA: Isaac Avram
FRC #2761 (CN Ironhorse)
Team Role: Programmer
  
Join Date: Jan 2013
Rookie Year: 2012
Location: Fresno, CA
Posts: 63
ILikePizza555 is an unknown quantity at this point
cRIO imaging tool hangs on "Rebooting cRIO"
Hi,

I've been trying to image our cRIO II with the imaging tool, but evertime I do it, It always gets stuck on "Rebooting cRIO."

I have the latest imaging tool (2013.1.10) and I have tried EVERYTHING. Safe-mode, direct Ethernet connect, direct crossover connection, connecting through the d-link, changing my ip between 10.27.61.5 and 10.27.61.6, and changing the subnet masks between 255.255.255.0 and 255.0.0.0. But each time I get the same result:

It gets stuck on "Rebooting cRIO" and all I get see is the little User1 light blinking rapidly.

Any help?

Edit: I opened up wireshark to see if it was accually doing something, since nothing seemed to be happing. Then, I found out that this happens everytime I open up the imaging tool or press "Apply":



So, it doesn't login with the right password?
__________________
PONIES ARE STOOPID MAGIK -Heavy
Last edited by ILikePizza555 : 12-01-2013 at 14:23.
Reply With Quote