|
Re: cRIO imaging tool hangs on "Rebooting cRIO"
I spent two days of beating my head against the wall doing this with the original cRio-FRC. It would hang at the "Rebooting cRio..." prompt.
We had a number of errors about the Set IP dip switch, which is virtual in your cRio II, but no flipping of it or any other switches helped.
It finally worked, and I'm not 100% sure why (but we'll take it) when I pressed the reset button on the cRio and/or cycled power to it before running the Imaging Tool.
I haven't tried to image the cRio II yet this year and don't recall if it has a reset button, but try that and see if it helps.
__________________
-= Mentor Lockport Warlocks -=- Team 1507 =-
Amateur Radio Callsign: AE2T
2015 Robot Inspector - Pittsburgh, Champs. Judge Observer - Champs
2014 Robot Inspector - Tech Valley, Fingerlakes, Buckeye, Championship
2013 Robot Inspector - Fingerlakes, Buckeye, Championship
2012 Robot Inspector - Fingerlakes, Buckeye, Championship
2012 Website Evaluator - Fingerlakes, Buckeye, Championship
2011 Robot Inspector - Fingerlakes 2011 Safety Advisor - Fingerlakes
|