|
Re: cRIO imaging tool hangs on "Rebooting cRIO"
Okay, so I did some poking around and found out that you can connect to the cRIO using FTP, and you can modify settings on the cRIO, if you have the admin password, using MAX.
The default username is "admin" and the default password is either "admin" or just blank.
So when I try and get onto the cRIO manually, I found out that those passwords have been changed, as it won't take them, and that the FTP's anonymous mode was disabled. That's probably the source of the problem.
Now how do I fix it is the question. Is there some way reset the cRIO to factory state or something?
__________________
PONIES ARE STOOPID MAGIK -Heavy
|