Thread: Frisbee CAD
View Single Post
  #14   Spotlight this post!  
Unread 14-01-2013, 23:44
Max Meaker's Avatar
Max Meaker Max Meaker is offline
Robotics Club Co-President
FRC #3786
Team Role: Mechanical
  
Join Date: Jan 2012
Rookie Year: 2011
Location: Renton, Washington
Posts: 14
Max Meaker is on a distinguished road
Re: Frisbee CAD
The dimensions in the game manual are incorrect. Corrections were made in the first team update.
Quote:
Team UPDATE - 2013-01-08
The DISCS are Wham-O part number 53214 (custom colored Red, White, or Blue) and have a nominal diameter of 11 in., a nominal height of 1.4 in., and a weight of 180 ± 5 grams.
Source: http://frc-manual.usfirst.org/Updates/0

Sorry if my first model has created any issues being that it was based off the wrong dimensions. Here's an updated model with the correct 11 in Diameter and 1.4 in height. Once again, the curvature of the Frisbee is approximate. Use at your own discretion. Hope this clears up any confusion.

Here's the .STEP file (right click and 'Save Link As')
http://dl.dropbox.com/u/99956340/Fri...01.4%20in.STEP
Last edited by Max Meaker : 14-01-2013 at 23:46.
Reply With Quote