|
Re: Imaging tool error
Try Disabling all other network interfaces on your laptop, e.g., wireless.
Leave only the Local Area Connection Enabled.
Use an Ethernet between the laptop and the router and another between the router and the cRIO.
Control Panel->Network and Sharing Center -> Change adaptor settings
right-click on the one's you don't need -> Disable
Start the Driver Station app and see what the ping tests show on the Diagnostics tab.
You should see green lights for Enet Link, Bridge, & Robot
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 15-01-2013 at 13:37.
|