Quote:
Originally Posted by Ether
10 ma should be more than adequate. How did you measure that?
Your circuit should work with the Jag. You may not get full output (see Al's post) because the Jags want a wider range on the pulse width, but it should work... Unless, perhaps, the Jag's don't like the 4 ms period. If had a Jag here I'd test it at 4ms.
|
The input current was derived from the voltage across the 270 ohm resistor, measured with a o'scope.
In all honesty, I didn't spend too much time troubleshooting the Jag. We have plenty of non-legal 883s for our test boxes.