|
Re: Wiring Pressure Sensor into Digital Sidecar
The DSC has "pull-up" resistors on all of the GPIOs. This means that, when nothing is connected to them, they will "act" as though they are connected to +5V.
This means you need to hook the pressure sensor up to the GND and SIG pins, such that when the switch closes it will pull the SIG down to 0V.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|