Quote:
Originally Posted by CalTran
Can we have a few more dimensions?
|
Quote:
Originally Posted by CalTran
I meant his robot dimensions. It seems awfully small to keep his arm inside the frame perimeter for starting.
|
You are right it is a pretty small bot the frame is in the 20" x 23" neighborhood. Tight fit for all of the electronics but doable. The arms would have to be extended up right to fit inside the frame perimeter/starting config, but would be shorter than 60"
Quote:
Originally Posted by CalTran
The purpose of this forum is to clarify Rules. We will not use it to declare strategies or designs unequivocally legal as there are factors in play beyond this forum. The 54 in. cylinder is not fixed to a specific reference point on the ROBOT when the ROBOT is contacting the PYRAMID. In other words, if a 54 in. right cylinder with a height of 84 in. could, in at least one orientation, fit around the ROBOT, the ROBOT is in compliance with [G23-1]-A.
|
Thank you GDC. I don't have to pull my hair out now. I only had to give away about half of the trade secrets.
