|
Re: cRIO connection issue-can't deploy code
Things to try, some of them already mentioned: - Disable all other Network connections leaving only the one you are using for the cRIO.
- Turn off all firewalls and anti-virus programs
- Verify the remaining connection has an FRC valid IP address, i.e., 10.13.7.5 (for Ethernet) or 10.13.7.9 (for wireless), Check the Advanced button for multiple IP addresses and delete any extras.
- Start the Driver Station to see the Diagnostic tab ping verifications
- Try connecting your laptop directly to the cRIO vis Ethernet cable
- Type ipconfig /all in a command window to verify what your network connections are.
- Close the Dashboard if it is open and reboot the cRIO. There is currently an issue if the Dashboard is trading data with an existing program on the cRIO.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 18-01-2013 at 10:46.
Reason: Corrected Alan's comment
|