Hello, we are from GreenBlitz 4590 and we have the same problem like you. We use 2013 windriver and updates, as well as the 2013 DS and cRio verion 2.
We also posted a thread in this forum:
http://www.chiefdelphi.com/forums/sh...d.php?t=111168
We also can run the robot for the first time, and after that the debugger can't run the code or when we enable it in the DS it shows us errors in the diagnostics window.
We thought maybe the problem is in the cRio, so we tried to change cRio (version 1) but it didn't work. We thought it might be because of the Windriver Workbench - when we tried a sample labview code it worked good.
We can run the code pretty good but we need to reboot the cRio each time. It's not so bad but maybe it's because of a deeper problem. We know that there are teams which don't reboot the robot between runs.
As for now we don't know what caused the problem. We are now exploring deeper the problem. If you have new information write to us in one of the thread, and we will write when we will come to new ideas
Greenblitz 4590