|
Re: 4 CIMs causing robot lockup
Quote:
Originally Posted by stinglikeabee
FYI to someone who may find this... We had a new CIM that was not assembled correctly and spun backward. Make sure the scribe marks on the black case of the CIM line up with the marks on the silver ends.
|
????? The marks are there so that in assembly, the holes for the screws can be found.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|