Because I'm having a similar issue, the Driver Station Messages are as follows:
Code:
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not an image.
<Code>-1074396120 ERROR: status = -1074396120 (0xBFF60428) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: Not an image.
Warning <Code> 44002 occurred at Ping Results: link-GOOD, DS radio(.4)-bad, robot radio(.1)-GOOD, cRIO(.2)-GOOD, FMS-bad Driver Station
<time>1/23/2013 2:58:58 PM<unique#>7
FRC: Driver Station ping status has changed.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396159 ERROR: status = -1074396159 (0xBFF60401) Error in convex hull operation: ...in ConvexHull() in C:/WindRiver/workspace/WPILib/Vision/BinaryImage.cpp at line 209
IMAQ Vision: Not enough memory for requested operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
Warning <Code> 44002 occurred at Ping Results: link-GOOD, DS radio(.4)-bad, robot radio(.1)-GOOD, cRIO(.2)-GOOD, FMS-bad Driver Station
<time>1/23/2013 2:58:37 PM<unique#>6
FRC: Driver Station ping status has changed.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
<Code>-1074396154 ERROR: status = -1074396154 (0xBFF60406) ImaqThreshold error: ...in ComputeThreshold() in C:/WindRiver/workspace/WPILib/Vision/ColorImage.cpp at line 37
IMAQ Vision: The image is not large enough for the operation.
__________________

2011: Head Scout
2012: (figure)Head Programmer
2013: Head Programmer, Chief Strategist, Outreach Executive, and Driver