Thread: Updating Jaguar Firmware for CAN
View Single Post
  #9   Spotlight this post!  
Unread 24-01-2013, 17:08
jwakeman jwakeman is offline
Registered User
FRC #0063 (Red Barons)
Team Role: Mentor
  
Join Date: Jan 2011
Rookie Year: 2010
Location: 16510
Posts: 182
jwakeman is just really nicejwakeman is just really nicejwakeman is just really nicejwakeman is just really nicejwakeman is just really nice
Re: Updating Jaguar Firmware for CAN
Quote:
Originally Posted by snegi13 View Post
I have the same problem. I also have a blinking yellow light. Instead, however, BDC-COMM is connected to COM Port 4 but it did not connect automatically I had to select "4" from the drop down box (I'm using a USB to serial cable). Also, there is a "Trusted" icon in the top left corner of the window. Otherwise, everything it the same, all grayed out and no board information. I tried resetting the jag while assigning a new board ID but even after the countdown the board information isn't any different. I would really appreciate any help, been struggling with this for a couple days.Thanks!
Sounds like you are not communicating with the jag at all. Is your serial to CAN cable home made or 'off the shelf'? Do you have a second cable you can try (maybe you have a bad one). Try only connecting to a single jaguar (if you aren't already). Do you have the terminating resistor installed?
Reply With Quote