[Team3763 Adam]

While trying to deploy NEW code onto the cRIO, we stare at the message "Waiting for RT cRIO to respond" for 10+ miuntes. This is a reoccuring problem, and we can't figure out why.

We can find the cRIO with the cRIO Imaging tool.

I've pinged both IPs with communitcation. IP on the cRIO (10.37.63.2) and IP on the Host Computer (10.37.63.6 subnet mask 255.255.255.0).

There are no issues with a Firewall.

Up until this point, we could run, test, and change code.

At one point during "Run as Startup" the communication was established between computer and cRIO and it started deploying up until it said deploying 2013_Build_Redo (The name of the project); and it then gave us the unforgiving message "Waiting for RT cRIO to respond."

Our cRIO is the NI cRIO-FRC, 8-slot.
*Could it be the computer? Our IP remains static 10.37.63.6 subnet mask 255.255.255.0
We've checked our ethernet cord, our voltage, and I've rebuilt the program from scratch, unable to deploy even basic code onto the cRIO even after re-flashing via the Imaging tool.

We've ordered the new NI cRIO-FRC II, 4-slot cRIO given out to rookie teams this year and plan to use this one as a backup if need be.