View Single Post
  #6   Spotlight this post!  
Unread 24-01-2013, 22:54
daniel_dsouza daniel_dsouza is offline
does what needs to be done.
FRC #2449 (Out of Orbit Robotics)
Team Role: Alumni
 
Join Date: May 2011
Rookie Year: 2011
Location: Chandler, AZ
Posts: 231
daniel_dsouza has a spectacular aura aboutdaniel_dsouza has a spectacular aura about
Re: cRIO imaging issue

We imaged 2 cRIOs this year. One had last years image, and the other one was blank( FIRST choice). We used a cross-over cable. If I remember correctly, this is important because the cRIO cannot auto-switch. I don't remember which IP we used, but it was the one assigned by the driver station. The imaging tool found both cRIOs, and we imaged them in less than five minutes. (Not at the same time mind you).

I might never trust a procedure that might brick a device to a wireless connection or a dlink connection, and will always trust my handy crossover cable. If you look up a cross-over cable, you can find out the wire pattern, and label yours so you can easily find it.