|
Re: Alternate Source for 1/2" Flanged Hex Bearings
Quote:
Originally Posted by Andrew Remmers
Its pretty hard to get those bearings, I have a lot of contacts and they could only find the Andymark bearings. However I did find a .5 inch Flanged Hex bearing with a 1.25 OD I think, those didn't quite work with our design so we went with the Andymark ones.
I did some searching and I found the bearing
http://www.wholesalebearing.com/ufhexbore.html
Hope this helps. Clearly it was 1.5 OD So its a bigger bearing but it might work
- Andrew |
We tried Lutco yesterday and they do not have any in stock or really wanted to deal with us (there right down the street) but the OD may make things a bit more complex in terms of space. I believe the vex pro bearings had a recall or something like that i called them yesterday and they claimed that they may have some in next week but they will make no guarantee. I also called andymark and they said that they had an order in then they were sent out locally for a modification and are trickling back, they should be back in stock by next week
__________________
ROOKIE Team 5400 WARP Mentor
Former FRC 1687 Highlander Robotics
Metal of Honor - Battle Cry 13 @ WPI
WPI districts Semifinalists-2014
Last edited by Paul T. : 25-01-2013 at 16:45.
|