Thread: Problem Imaging 8-slot cRIO
View Single Post
  #15   Spotlight this post!  
Unread 26-01-2013, 16:13
rathsdaemon rathsdaemon is offline
Registered User
FRC #2283
  
Join Date: Jan 2013
Location: mexico
Posts: 4
rathsdaemon is an unknown quantity at this point
Re: Problem Imaging 8-slot cRIO
Ok this is going to be a bit lengthy, thanks for helping

1st, we have verified that wesee have the right IP address, and we can actually ping the CRIO at the correct address
see:



2nd, as we can ping and we can connect, we can run the imaging tool


As you can see, we have the crio in the right IP address, and it detects it as an 8 slot crio, even the name PANTERAS is ok

so we select to Format the controller with the right version, and choose LabView and press APPLY

a popup appears stating Connecting to the CRIO and finally after a few seconds we get this error




We cant find the error in the process and yet it does not re-image

Any suggestions?
Last edited by rathsdaemon : 26-01-2013 at 16:17.