Quote:
Originally posted by Jnadke
There is a variable in the code that will tell you how many packets have been sent. Normally, it will be 1, meaning that only 1 packet has been sent. If it is more, then it is (delta_t * 25ms)
|
I have used delta_t and delta_t will not equal 1 if 1 packet has been sent. delta_t will tell you how many packets you missed while executing your code. If you only missed on it will return a 0. So the actually more like ((delta_t + 1)*25ms). I don't quite use this formula but you should keep in mind that if delta_t = 0 then 25ms has passed. If it equals 1 then 50ms and so on. Again this is not that exact but it is the closest you will be able to get.
In my personal experiance I found that the Stamp gains 3sec over 1min. I guess this is not too bad but it definitly is not good. Over 15sec it doesn't gain too much so if you are trying to keep track of time in Autonomous mode then you should be ok.