Thread: pic: MiniCIM Versaplanetary
View Single Post
  #9   Spotlight this post!  
Unread 28-01-2013, 15:02
ken.3038 ken.3038 is offline
Registered User
FRC #3038 (I.C.E.)
Team Role: Mentor
  
Join Date: Jan 2010
Rookie Year: 2009
Location: Minnesota
Posts: 13
ken.3038 is an unknown quantity at this point
Re: pic: MiniCIM Versaplanetary
Our team is going with a single wheel (8" pneumatic) with a curve. The first attempt was a CIM direct to a hub mounted on the wheel but failed. The hub egg shaped from the CIM shaft. Next we tried a belt driven shaft mounted with bearings but there is to much vibration. We have ordered 2 Versaplanetary gearboxes which one will be changed to 1:1. Mounted to a AndyMark 1/2" hex hub. The idea came from your thread with your small shooter. I shouldn't have cut the shaft with a 1:1 correct?
Reply With Quote