|
Re: Andy Mark Worm Box wanted in North central Florida
Quote:
Originally Posted by LeelandS
If you can't find a team to loan you a WormBox in a reasonable time, you could consider this (we did earlier in the season).
AndyMark has almost all of the individual hardware pieces for the WormBox in stock (i.e. Side plates, spacers, and even the worm and worm gears themselves). The only piece currently listed as out-of-stock is the output shaft. You could try ordering each individual part and then making up your own output shaft using the CAD information AndyMark posts on their website. The AM WormBox page should list all of the necessary components and hardware you need.
I hope this helps you along.
Regards,
Leeland
|
AndyMark has posted the layout drawing for the output shaft. If you have access a lathe and a mill, it would be easy to replicate it.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|