|
Re: Using the 12v-5v converter for powering custom circuits?
Quote:
R44
The wireless bridge power feed must be supplied by the 12VDC-to-5VDC converter (P/N: CLL25-24S05) connected to the marked 12VDC supply terminals at the end of the PD Board (i.e. the terminals located between the indicator LEDs, and not the main WAGO connectors along the sides of the PD Board) shown in Figure 4?8. No other electrical load may be connected to these terminals.
|
This seems ambiguous to me. I would post to the Q&A.
__________________
Team 973 (2016-???)
Team 5499 (2015-2016)
Team 254 (2014-2015)
Team 1538 (2011-2014) 2014 Driver (25W 17L 1T)
日本語でOK
|