|
Re: Unable to use camera set VI's on dashboard
There are two versions of the Camera Open, one for robot and one for PC. The PC version previously was only used for dashboard. This year, it was also used for simulated robots, and the simulated code was added to it. When this was done, a parameter was added to avoid running the simulated code when used for dashboard. But the LV compiler still compiles in the simulated code because it can't tell that you won't call it at some point.
You only need to call Open if you are trying to set camera properties like resolution. These can also be set on the robot. That is what I recommend until the dashboard and simulated camera usage is resolved.
Greg McKaskle
|