Quote:
Originally Posted by Joe Ross
Compare a working Victor to a bad Victor. Is the PWM cable inserted to the same depth on both?
|
The PWM cables are pretty hard to settle in there, but they are hooked in. [Scratch this] We now believe it might be a defunct PD board. But essentially what is happening when we enable is:
- 2 Victors are solid yellow.
- 4 Victors continue to blink.
- The 4 blinking are wired to our CIM motor, and will not output any power.
- If we swap out one of the blinking Victors with a solid-light Victor, the motor gets power, as expected.
Certain slots could be busted on our PD board, we're still troubleshooting. (also, on hold with VEX Pro. Thanks Ricky!)
edit: disregard, our PD board is fine.