|
Re: Problem with cRIO Imaging tool
On the cRIO by where the power is connected there are white switches that can be toggled like a teeter-totter back and forth. Turn your cRIO off and then toggle the one that says IP Reset next to it to the on position. Turn your cRIO back on and the indicator light should flash yellow until the IP is reset. Once it's done flip the switch back to off and attempt to image the cRIO again.
Edit: I believe the switches are called "DIP Switches"
Edit: It sounds as if the DIP switch for the IP Reset is in the on position, all DIP Switches should be off when imaging a cRIO and for normal operation.
__________________
2012: Buckeye Regional, Queen City Regional, Human Player
2013: Queen City Regional, Buckeye Regional, Crossroads Regional
Shooter Operator
2014: Crossroads Regional, Queen City Regional
Catapult Operator
2015: Georgia Southern Classic Regional (Winner), Queen City Regional
Chainsaw Operator
Want to talk? TeamSpeak: team3266.noip.me
Last edited by Team3266Spencer : 31-01-2013 at 17:38.
|