|
Re: building and deploying code
Tell us the steps you've taken.
For instance, did you: - Create a default robot project
- Put your robot up on blocks and power it up
- Downloaded the default program to your robot:
- Right-click on Build Specifications -> FRC Robot Boot-up Deployment and choose Build
- Right-click again on Build Specifications -> FRC Robot Boot-up Deployment and choose Run as startup
- Plug one joystick into your PC
- Startup the Driver Station application and see if the Communication and Robot Code lights turn green
- Enable your robot
- Test the joystick
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
|