|
Re: pic: 1538 Waterjet Samples
Quote:
Originally Posted by Mk.32
And this is why CNC was created 
If I only have a manual mill I usually use a 3/4inch drill bit to do my lighting. |
I used a 3/8 inch 2-flute end mill. I started our with a 4-flute and learned that 4-flutes and aluminum don't mix  it melted my piece. And the absence of WD-40 caused the aluminum to stick inside of the bit  .
Also, it was manual.
__________________
J Wallace IV
Truck Town Thunder
Just a college student now.
|