Hello, This is Tom Bonar from MaxBotix Inc.
Alan, the HRLV-MaxSonar-EZ sensors output approximately 4.885mV per 5 mm. The quickstart guide from last year is good for the fundamentals of wiring the sensor and connecting it, but the Analog Voltage output is different than that of the LV-MaxSonar-EZ sensors.
You can read the section entitled "5-Meter HR-MaxSonar sensors", there is information on
Using the Analog Voltage Output of the HRLV-MaxSonar-EZ sensors.
Please let me know if you have any questions.
Best regards,
Tom Bonar
Technical Support
of MaxBotix Inc.
Phone: (218) 454-0766
Fax: (218) 454-0768
Email:
thomas@maxbotix.com
Web:
www.maxbotix.com
Follow us on Facebook at:
http://www.facebook.com/pages/MaxBot...25159384204938
Technical support and sales are subject to
the terms and conditions listed on our
website at
http://www.maxbotix.com/ MaxBotix,
MaxSonar,EZ0, EZ1, EZ2, EZ3, EZ4, AE0, AE1,
AE2, AE3, AE4, WR1, WRA1, and WRLA1 are
trademarks of MaxBotix Inc.