|
Re: The three lights are green, but the robot is unresponsive.
For the camera problem...
The camera to Dashboard doesn't depend on the cRIO.
That should work event if there's no cRIO at all.
There are new reasons that the camera might not be working that didn't exist last year.
If you've used the FRC Bridge Configuration tool on your DLink, then there is now a 7Mb/s bandwith limit that affects the camera video stream. The easy check for this is to enable the camera then use the new Dashboard video controls to cut the video resolution/fps/compression way down, just to see if a picture appears.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 08-02-2013 at 08:36.
|