[Greg McKaskle]

You have done many of the same things I would have suggested.

You may want to try launching the NI Vision Assistant, choose to Acquire an image, choose the Axis at the bottom of the list, and see if your camera IP works there. After you set the IP, you will also need to press the play or snap button. This plug-in uses the same/similar VIs as LV does.

The other option is to build the dashboard project open the code and debug the vision stuff a bit. I would probably open the Read MJPG VI and look at the string coming back from the camera, at the size of the string, and then inside the loop at the image created from it.

Greg McKaskle