|
Re: Location of the PD Board
All,
The rule exists so that inspectors can be sure you have the legal breakers installed, that the breaker meets the minimum wire size for the rating and that there is only wire in each WAGO terminal. We then check to see that the radio is wired correctly as is the Crio. During Power On testing we also check to see that all LEDs are lit. We will work with you if your design requires a special mounting, access or cover, but if you make impossible to see the above conditions you will have to correct it.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|