Hi Mr. Mckaskle,
I would like to say, thanks for different solutions which is not found in guides, PDFs or forums. I have
tried to use NI Vision Asssistant to aquire image. Sadly, an error occured again. As you said, I chose aquire image
(Axis IP), set the IP 10.36.46.11 and resolution 320x240. Axis M1011 Camera is plugged the computer via crossover cable
and IP of the Ethernet Connection is 10.36.46.5. Firstly I have set the subnet mask of the computer to 255.0.0.0 and error
(in the first image) occured. Then I changed subnet mask to 255.255.255.0 and again same error.
Error says :
Error -20001 occured at Read Axis JPG.vi
Data Length from camera = 0
Possible Reasons :
Analysis : There is not enough memory to perform the specified routine.
Below, there are pictures of settings and error. Why does this error occur ? I have no idea.
Error :
http://b1302.hizliresim.com/16/9/jy9cr.png
IP Settings 1 :
http://b1302.hizliresim.com/16/9/jy9f1.png
IP Settings 2 :
http://b1302.hizliresim.com/16/9/jy9g1.png