|
Re: Breaker Switches and Buttons to Motors
Servos require a jumper on the Digital Sidecar, beside the PWM that the servo is attached to.
That jumper feeds the servo it's power.
Your posted code is setting the same motor (Motorsingle 1) in two different places at the same time.
That's never good.
You need to combine or choose between the competing Buttons and decide on an order of who goes first.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 11-02-2013 at 23:22.
|