[odogollie]

Hello!
So here is the problem. On the Driver Station on the left side where you would see the voltage and stuff, we are not getting a robot com green light. But in the Diagnostics section of the Driver Station it says we have Coms with the robot. Also I was able to pick up the cRIO in the Imaging tool and reimage it. And again connecting to cRIO from LabVIEW was fine and dandy. I was able to upload the code to the cRIO but I had lots of messages saying "Waiting for response from Real Time Target (cRIPO)" or something close to that. It took probably 3 times longer then normally. We do use the Classmate to upload the code and do all of the driver stuff. So being that the laptop was from last year, I reimaged that as well. I'm not sure what is going on. Someone please help us!

Thanks!