Quote:
Originally Posted by Alan Anderson
Black motor? That's a CIM, MiniCIM, or BAG motor. Those are only allowed to be controlled by Jaguar, Talon, or Victor speed controllers. You may not connect them to a relay.
You wouldn't be able to control the speed using a relay anyway; they'd be either off, full speed forward, or full speed reverse.
I think you want to use a gamepad or joystick button to switch back and forth between two states. State one has the motor running full speed forward, and state two has the motor running slowly backward. Is that right? The LabVIEW code for doing it is simple, but I want to make sure I have your requirements straight before walking you through doing it.
|
Oh I didn't know that, so after some time we realized what we will use.
I need to use 2 cim ( we are not sure yet will we use 2 or one to rotate two discs but I think it would not be hard to modify code ) motors to rotate at same speed and same direction forward, and when I press button4 it changes direction to reverse and with some slow speed.
Also I need to make one Mini Cim so when its pressed it goes with some slow speed until button is released.
Yes, I wont to use joystick so when I press button it CIM motors runs reverse with slow speed and when its pressed again it goes back to default state ( forward with full speed ) .
Also does anyone know any solution to camera problem ?
This seems to be complex but I really need your help to learn and to realize the project successfully.