|
Re: Four Little Motors
This sounds familiar. I'll guess that you are using PWMs to command the speed controls, correct?
It is possible to drive a couple speed controls via PWM w/o powering the DSC. But, once you get more than a couple PWMs going out of the DSC w/o powering it, you begin to have trouble.
Make sure you have +12vdc going the the DSC from the PDB. Then also verify that you have 3 green lights lit up on the DSC. That should do it.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|