[Travis Covington]

Originally Posted by sanddrag

On the power strips, you've got to be kidding me. It's not about how many you hook together. It's about the load being put on them. So long as the load is well below spec, I see no issue in daisy-chaining power strips. If they are truly going to stop us from daisy-chaining power strips, they better provide us with at least 4 outlets per pit. Either that, or someone needs to point me to a 20-outlet power strip/squid. Or, can we use a triple-tap outlet adapter in each outlet in a power strip? This is silly.

Read the OSHA regulations and National Electrical Code for more information. This is all covered and pretty widely accepted as safe practice. Same goes with power strips plugged in to extension cords, extension cords plugged in to extension cords, etc.

Correct me if I am wrong, but I believe UL also has requirements to state what can and cannot be plugged in to extension cords, power strips etc. It usually says on the device "do not plug in to another power strip" or something like that. Doing any of these things violates the UL listing, which in turn goes against the OSHA and NEC requirements to use UL devices per their recommended listings.