|
Re: Displaying camera image and getting the dashboard to display in the driverstation
Too many answers and not enough to the question.
Let's assume that you created a new Dashboard project.
You went to Build Specifications and ran Build.
There are several ways to get it to run.
Pick one: - Start it yourself. You'll find it at Documents\LabVIEW Data\builds\FRC Dashboard Project\FRC PC Dashboard
- Copy the executable (above) to where the Driver Station expects to find it (C:\\Program Files (x86)\FRC Dashboard).
- If you left the new project name default, then in the Driver Station app. you can choose the LabVIEW button on the Setup tab.
- Right-click on FRC PC Dashboard under Build Specifications, and choose Properties. Change the Destination Directory to C:\\Program Files (x86)\FRC Dashboard, and whenever you build it will replace the existing default Dashboard with your new one.
- There are other ways...
If you want it to run on another machine, then you'll need to copy the executable over to it (#2 above).
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 15-02-2013 at 13:52.
Reason: Added #4 so I could reference it later.
|