Quote:
Originally Posted by AmLameBro
Also, I just thought of another potential problem: is the PWM cable going into the Jaguar supposed to be. . .well, loose? When we insert a PWM cable into a Spike Relay, there is a good satisfying click. With the Jaguar, though, it just sort of slides in and slides out easily.
|
I put tabs on the front of the Jaguar so that you can slide the PWM wire under the tab and then up and over into the PWM connector. That helps keep them in and also is strain relief. The connector is slightly larger to accept multiple types of 1x3 0.1" connectors.
-Scott